Answer 28

Correct answer: b

Explanation:

Use 'show ip interface' command to display configured access-lists on a router interface. An example is provided below:

Router#show ip interface ethernet 0

Ethernet0 is up, line protocol is up

  Internet address is 10.1.1.1/24

  Broadcast address is 255.255.255.255

  Address determined by setup command

  MTU is 1500 bytes

  Helper address is not set

  Directed broadcast forwarding is disabled

  Outgoing access list is not set

  Inbound  access list is 1

  Proxy ARP is enabled

  Security level is default

  Split horizon is enabled

  ICMP redirects are always sent

  ICMP unreachables are always sent

  ICMP mask replies are never sent

  IP fast switching is enabled

  IP fast switching on the same interface is disabled

  IP Feature Fast switching turbo vector

  IP multicast fast switching is enabled

  IP multicast distributed fast switching is disabled

  <text ommitted>

Test Objective:

Network Management