Question 2

Which is the recommended option to reduce the STP convergence time in a network?

a.
Use commands:
Set spantree hello
Set spantree fwddelay
Set spantree maxage

b.
To decrease the parameters of hello time, forward-time and max-age use commands:
Set spantree hello ‹interval› ‹vlan›
Set spantree fwddelay ‹delay› ‹vlan›
Set spantree maxage ‹agingtime› ‹vlan›

c.
To increase the parameters of hello time, forward-time and max-age use command:\
Set spantree portfast {module/port} {enable|disable}

d.
To enable PortFast on all ports of the network use command:
Set spantree root [secondary] [‹vlan-list›] [dia ‹diameter›]

e.
To change the values of hello interval and the diameter: redesign the network.