Answer 1

Correct answer: b

Explanation:

The 'show version' command is one of the most used IOS commands. It displays the configuration register setting including various useful hardware and software information of the router. A sample output of this command is as follows:

Router#show version

Cisco Internetwork Operating System Software

IOS (tm)2500 Software (C2500-JS-L),Version 11.3(6),RELEASE SOFTWARE (fc1)

Copyright © 1986--1998 by cisco Systems,Inc.

Compiled Tue 06-Oct-98 22:17 by kpma

Image text-base:0x03048CF4,data-base:0x00001000

ROM:System Bootstrap,Version 5.2(8a),RELEASE SOFTWARE

BOOTFLASH:3000 Bootstrap Software (IGS-RXBOOT),Version 10.2(8a),

RELEASE SOFTWARE (fc1)

Router uptime is 25 minutes

System restarted by power-on

System image file is "flash:c2500-js-l_113-6.bin",booted via flash

cisco 2500 (68030)processor (revision D)with 4096K/2048K bytes of memory.

Processor board ID 04203139,with hardware revision 00000000

Bridging software.

X.25 software,Version 3.0.0.

SuperLAT software copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

2 Ethernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Test Objective:

Cisco Basics, IOS & Network Basics